美國ASCO導式真空閥,SCXG262C021J? Two way shut-off pilot operated valves for air and inert gas compatible with the seal materials used? The solenoid valves satisfy all relevant EC Directives GENERALDif
美國ASCO導式真空閥,SCXG262C021J
(10-3) 10,5 - SCE210C035VM MO - NO - Normally open, high vacuum range to 10-6 Torr, FPM seals 3/8 16 2,6 43 1,33.10-6
replacement coil
hot/cold = ~= (VA) (VA) (W) (W) (C°) 230 V/50 Hz SC 55 23 10,5 - -20 to + 75 400425-117 - 01
(1) Refer to the dimensional drawings on the following page.
minimum absolute vacuum pressure (PS) power coil (W)
air (?) Rp (mm) (m3/h) (l/min) mbar (Torr) ~ ~ NC - Normally closed, low vacuum range to 25 Torr, NBR seals 3/4 19 5,2 87 33,3
(25) 10,5 - SCE210C033 MO - 1/2 16 3,4 57 33,3 (25) 10,5 - SCE210C034 MO - 3/4 19 4,7 79 33,3
(25) 10,5 - SCE210C035 MO - NO - Normally open, medium vacuum range to 10-3 Torr, NBR seals 3/8 16 2,6 43 1,33.10-3
or with cable length of 2 m (see Solenoids, Coils & Accessories section)
• Two way shut-off pilot operated valves for air and inert gas compatible with the seal materials used
• The solenoid valves satisfy all relevant EC Directives GENERAL
Differential pressure 1 bar absolute [1 bar =100 kPa] Response time 15 - 120 ms ? uids
(?) temperature range (TS) seal materials (?) air, inert gas - 20°C to + 85°C NBR (nitrile) - 20°C to + 90°C FPM (? uoroelastomer)
MATERIALS IN CONTACT WITH FLUID (?) Ensure that the compatibility of the ? uids in contact with the materials is veri? ed
直動式/導式,常閉,
INSTALLATION • The solenoid valves can be mounted in any position without affecting operation
美國ASCO導式真空閥,SCXG262C021J
• Pipe connection identi? er is E = Rp (ISO 7/1)
• Installation/maintenance instructions are included with each valve
(10-3) 10,5 - SCE210D095VM MO - NC - Normally closed, high vacuum range to 10-6 Torr, FPM seals 3/4 19 5,2 87 1,33.10-6
真空用途,黃銅閥體,
(10-6) 10,5 - SCE210C033VH MO - 1/2 16 3,4 57 1,33.10-6 (10-6) 10,5 - SCE210C034VH MO - 3/4 19 4,7 79 1,33.10-6 (10-6) 10,5 - SCE210C035VH MO -
• Waterproof enclosure with embedded screw terminal coil according to protection class IP67, CEE-10
• Explosionproof enclosures for use in zones 1/21-2/22, categories 2-3 to ATEX Directive 94/9/EC (see “Explosionproof solenoids” section)
• Electrical enclosures according to “NEMA” standards are available
• Compliance with “UL”, “CSA” and other local approvals available on request
(10-6) 10,5 - SCE210D095VH MO - NO - Normally open, low vacuum range to 25 Torr, NBR seals 3/8 16 2,6 43 33,3
Rp螺紋,口徑:3/8-1/2,
操作壓差:真空33.3/中1.33×10ˉ³/1.33×10ˉ6(Mbar)
FEATURES • Special materials and handling procedures are used in the high vacuum valves to avoid molecular contamination
• The medium and high vacuum valves are mass spectrometer tested
Body Brass Core tube Stainless steel Core and plugnut Stainless steel Springs Stainless steel Seat Brass Seals, diaphragm & disc NBR
or FPM Disc holder (NO function) PA Shading coil Copper ELECTRICAL CHARACTERISTICS Coil insulation class F Connector Spade plug
(cable Ø 6-10 mm) Connector speci? cation ISO 4400 / EN 175301-803, form A Electrical safety IEC 335 Electrical enclosure protection
Moulded IP65 (EN 60529) Standard voltages DC (=) : (Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V - 230V / 50 Hz
power ratings operator ambient temperature range (TS)
介質溫度:-20℃~+90℃,
(25) 10,5 - SCE210D095 MO - NC - Normally closed, medium vacuum range to 10-3 Torr, NBR seals 3/4 19 5,2 87 1,33.10-3
• Mounting brackets, suf? x MB • Other pipe connections are available on request
• Plug with visual indication and peak voltage suppression
(10-3) 10,5 - SCE210C033VM MO - 1/2 16 3,4 57 1,33.10-3 (10-3) 10,5 - SCE210C034VM MO - 3/4 19 4,7 79 1,33.10-3